In Gibsonton, mold remediation usually follows river or bay flooding, a roof leak, or moisture trapped under a mobile home. The fix is the same in each case: stop the water, remove moldy porous materials, clean and dry the structure, then rebuild. Call the number on this page to be connected with a local mold remediation company in Gibsonton.

Gibsonton at a glance
Gibsonton is a bayside community at the mouth of the Alafia River, bordered on the west by Hillsborough Bay, with U.S. 41 running through the middle. It is famous as a winter home for carnival and circus performers, and its housing reflects a working community: about two-thirds detached houses and roughly 27 percent mobile homes. During Hurricane Helene in 2024, most homes on Oak Street, a peninsula that juts into the Alafia, flooded, and neighbors said the street had never flooded before.
What to do now
- Stop the water. Fix the leak, or if floodwater came in, get the house open and drying as soon as it is safe.
- Protect people first. EPA says anyone with asthma or a weakened immune system should stay away from moldy areas. Wear at least an N-95 respirator, gloves and goggles for any hands-on work.
- Turn off the AC if you suspect it is contaminated. EPA warns that running a moldy system can spread spores through the house.
- Pull out soaked materials. Carpet, pad and anything porous that stayed wet more than 24 to 48 hours is likely to grow mold.
- Measure the area. Under about 10 square feet is usually a homeowner job, according to EPA. Larger than that, call a remediation company.
- Document it. Photos of the waterline, stains and damaged contents help with insurance and with the company's estimate.

What you see and what it usually means
| What you see | Likely cause |
|---|---|
| Mold along the bottom 1 to 3 feet of the walls | Floodwater wicked up the drywall |
| Soft or sagging floor in a mobile home | Wet insulation or a torn vapor barrier in the underbelly |
| Stains around ceiling seams or the roof line | Roof leak or failed seal at a vent |
| Growth on window frames and nearby walls | Window leak or heavy condensation |
| Musty air handler closet | Clogged condensate line or overflowing drip pan |
What drives the cost
Angi reports Tampa-area mold remediation commonly falls between $1,347 and $3,778 and notes most pros charge about $10 to $25 per square foot. A mobile home where the subfloor and skirting area need attention can cost differently from a slab house, because the work moves underneath the floor. Size of the affected area, how much has to be torn out, whether the AC is involved, and the rebuild all move the number. In unincorporated Hillsborough, structural repairs in a Special Flood Hazard Area need a permit from Hillsborough County Development Services; cosmetic drywall replacement does not, though the county asks for a Substantial Damage packet after storms.
Mold Removal & Remediation questions in Gibsonton
Is mold removal different in a mobile or manufactured home?
My house took on water. Should I assume there is mold?
Who should stay away from the work area?
Will the county health department test my home for mold?
More mold services in Gibsonton
Mold Removal & Remediation nearby
Sources
- EPA: Mold Cleanup in Your Home
- EPA: Homeowner's and Renter's Guide to Mold Cleanup After Disasters (pdf)
- Angi: How Much Does Mold Remediation Cost in Tampa, FL?
- Hillsborough County Development Services
- Hillsborough County: Rebuilding and Repair After a Hurricane
- Florida DOH: Indoor Air Quality Contacts
- Wikipedia: Gibsonton, Florida
- Point2Homes: Gibsonton demographics and housing
- ABC Action News: Neighbors contemplate next steps after flooding along Alafia River
Last updated: